Panasonic wv-cu950/g manual

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance.

The serial number of this product may be found on the surface of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Install in accordance with the manufacturer's instructions. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety.

If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

A surveillance control system cannot be composed of this product alone. In addition, up to 4 system controllers can be connected for multiple operation. The system controller has improved functions such as camera control, multiscreen segment switching, and search playback.

These are fundamental functions to surveillance control systems. This product has employed a 3D joystick which is separated from the main unit. This product has employed the JogDial and shuttle ring to improve the control of recorded images. You can assign frequently-used functions to the function buttons. The function assignment is possible while watching the LCD. In addition, password is assignable to prevent inappropriate operations. Note: You need to upgrade the software version of matrix switcher.

This could permanently damage the appliance. Turn the power off immediately and contact qualified service personnel for service. There are no user-serviceable parts inside. Contact qualified service personnel for maintenance.

Take immediate action if the appliance gets wet. Refer servicing to qualified service personnel. Moisture could damage the appliance and also cause electric shocks. Do not try to operate it in wet areas. Turn the power off and refer servicing to qualified service personnel.

Moisture can damage the appliance and also cause electric shocks. Use a dry cloth to clean the appliance when it is dirty. When the dirt is hard to remove, use a mild detergent and wipe gently. Refer to p. Do not install it in places where the appliance is exposed to sunlight for long periods of time or near air conditioning equipment. This will cause deformation, discolouration, breakdown or malfunction. Caution s : Caution statements identify conditions or practices that could result in damage to this product or injury.

Lead free solder will tend to splash when heated too high Lead free solder Sn - 3. This service information is designed for experienced repair technicians only and is not designed for use by the general public. It does not contain warnings or cautions to advise non-technical individuals of potential dangers in attempting to service a product. Products powered by electricity should be serviced or repaired only by experienced professional technicians.

Any attempt to service or repair the product or products dealt with in this service information by anyone else could result in serious injury or death. Weight and dimensions indicated are approximate. Specifications are subject to change without notice. When service is required, observe the original lead. Components, wires or cables that indicate. After servicing see to that all the protective devices, such.

Two images digitally combined 6. Move the cursor to DNR, and then tilt the joystick joystick left or right to select a white balance mode. This will display the ID position setting menu. Move the cursor to CNT-CLS 1, and then tilt the joystick left and right to select the operation the joystick left and right to select the alarm output that should be performed over ALARM OUT 1 when an camera should perform when an external signal is alarm is detected. First, display the special setup menu.

First, display the scene select setting menu. This will display the password input menu. If the countermeasures described below do not correct the problem, or if the symptoms you are experiencing are not covered here, contact a quality service person or system installer. If so, clean them. I forgot the password. Die Stromversorgung wird eingeschaltet, sobald das Intensives Licht, wie z.

Seite 67 Drehen Sie den Kuppelbefestigungsring nach links, um ihn abzunehmen. Bringen Fangdraht sicheren 9. Grundplatte an. Zwei digital 6. EIN 2 : Aktiviert die Privatzonenfunktion. Page Passworteinstellungen 1. Falls ja, reinigen Sie sie. Conservez ces instructions. Tenir compte de tous les avertissements. Nettoyer uniquement avec un chiffon sec. Page Precauciones 3. Enganche el cable de seguridad para sujetar la 9. While an alarm mode is active, the following are available from the system controller:.

Then, "Alarm" sign and the alarm indicator will blink. There are two operation modes when more than one alarm signal has been accepted by the matrix switcher that is assigned to the same monitor.

The camera with an alarm input will become operable. Operate camera with the system controller. Panning, tilting, zoom, focus, and iris are available. When selecting another monitor, "ACK" will disappear from the display. The matrix switcher system will return to the alarm mode. When alarms have been reset from all the monitors, the LCD display and indicators of system controllers will work as follows for recovery.

Note: When more than one alarm is input and they are associated with the same monitor, they cannot be reset one by one. The monitor, the indicator, and the LCD display will change as follows:. Use this function when you do not want to be disturbed by an alarm input, for example, during the setup procedures. Reset the alarm, and then suspend it again. Welcome to ManualMachine. We have sent a verification link to to complete your registration. Log In Sign Up.

Forgot password? Enter your email address and check your inbox. Please check your email for further instructions. Enter a new password. Panasonic wv-cu Operation Manual Download for 1. The factory default setting is "". Mon- Cam Mon1 Cam-- 3. In this case, return to Step 1 and select another monitor number. The monitor number returns to the normal display on the active monitor.

In this case, return to Step 2 and select another camera number. Mon1 Cam M04 Note: This function will prevent operators with lower priority from gaining control of a monitor. Mon1 Cam04 Note: Cameras selected by operators with higher priority will be skipped. Top button. Rst 3. Rst 4. This function enables executing camera functions via a shortcut. The selected function will be executed on the active monitor.

The operation data will be saved.